Safe Driving Wall Travelling Jib Crane
Introduction of Wall Traveling Jib Crane Wall Traveling Jib Crane of crane is mounted horizontally on the wall and instead of a vertical shaft has a RCC column bracket mounting. The hoist mechanism is similar to the floor mounted type, but without a vertical boom. The RCC column bracket allows a maximum rotation of 200 degrees but covers the area near the bracket mounting without obstruction at floor level. Application of Wall Traveling Jib Crane 1.Widely used in workshop, storage, yard, Fabrication shops, Machine shops, Assembly floors, Loading/Unloading purposes, Indoor/Outdoor duty and some other fixed place 2.Wall Traveling Jib Crane Especially used for lifting in short-distance or serried place 3.Forbidden to use it in inflammable, explosive corrosive condition Features of Wall Traveling Jib Crane (1). Simple installation Wall Traveling Jib Cranes can be mounted on wall, no special floor space required. (2).Shorten loading time, improve work efficiency With a jib crane, workers can lift, quickly transport and precisely deposit all kinds of work pieces at any time. (3).Easy handing, lighten laboring work Wall Traveling Jib Crane can relieve the strain of physically demanding work on your staff. The risk of injuries or accidents when handing heavy or unwieldy parts is considerably reduced. (4).High quality with good price Wall Traveling Jib Crane are ending with full load factory testing of every part, certifies the functionality and quality to customers. We will offer you the most adequate equipment for your needs through good communication.
Fixed Column cantilever jib crane
Fixed Column cantilever jib crane of introduction Fixed Column cantilever jib crane is reasonable and safe in operation. It has wide 360 degree operation scope which is suitable for machining…
Fixed wall mounted slewing jib crane
Fixed wall mounted slewing jib crane of Product introduction 1.Fixed wall mounted slewing jib crane offer a lower cost design with the greatest potential clearance under the boom. 2.Jib crane has a horizontal jib supporting a movable hoist, is fixed to a wall or to a floor-mounted pillar. The jib may swing through an arc, to give additional lateral movement, or be fixed. 3.This crane can move loads around corners, reach into machines or exit, and swing under obstructions. 4.This crane is perfect in applications that require an operator to rotate the jib in close to the pivot point. 5.Capacities: Wall mounted is 0.125 ~1 Ton, With spans up to 5 meters. 6.180 degree rotation for wall mounted 7.Suited for applications where perating around obstacles or swinging under obstructions is necessary 8.Manual swing and motorized swing Fixed wall mounted slewing jib crane of Technical Parameter: item specifications…
BX Type Wall Cantilever Crane
Small light lifting equipment Convenient installation Little space occupation Product Specification:
CE Approved Floor Mounted Lifting Arm Crane
Floor mounted lifting jib crane of product descrption Floor mounted lifting jib crane is reasonable and safe in operation. It has wide 360 degree operation scope which is suitable for machining workshop,…
Heavy duty mounted column slewing jib crane
Heavy duty mounted column slewing jib crane Heavy duty mounted column slewing jib crane is reasonable and safe in operation. It has wide 360 degree operation scope which is suitable…
High speed electric winch
Brife introduction of High speed electric winch : High speed electric winch , most of time, is followoperated by people on the ground, in the room,or be operate with wireless type in far way, except exclusive-use. It can also use with electric trolley and plain trolley, geared trolley. These trolleys are simple structure, light weight and easy to load and unload. They can be used not only forever, but also temporarily. High speed electric winch can be widely used in port, workshop, warehouse, construction and manu kinds of producing-line. So it is an necessary equipment for lifting goods, raising labor efficiency and improving working conditions. High speed electric winch has fast hoisting speed. It is used for hoisting and unloading the weight materials, such as all kinds of large and middle concrete construction of steel,installation and disassembly of mechanical equipment,it is suitable for construction and installation engineering of construction,mining area,factory and so on. The standard capacity of electric winch is 1t-2t, 3t, 5t, 6t, 8t, 10t, 12t, 16t, 20t, 32t…..etc. The max rope length is up to 1500m. Technical parameter of High speed electric winch: model JM-2T JM-3T JM-5T JM-8T JM-10T Line pullcapacity(KN) 20 30 50 80 100 Rope speed(m/min) 12 10 10 10 9 Wire rope dia.(mm) 12.5 15.5 21.5 26…
ND series European electric Hoist
Introduction of ND series European electric Hoist ND series European electric Hoist adopts the European FEM design standards with advanced concept, beautiful appearance. The drive adopts domestic advanced point line meshing gear structure making the machine has compact reasonable structure. The operation is simple, convenient and working is safety and efficient and meet the low noise, energy conservation and environment protection requirements. ND series European electric Hoist applied 13patent technologies, This series of products are designed with frequency control of motor speed, small impact and it can realize accurate positioning. Equipped with intelligent montioning recorder which is similar to the "black box"of plane, it can uninterruptedly record crane working status information and prevent false operation. The machine use maintenane free design with small vulnerability and convenient maintenance. The overall technical level has reached the advanced level of similar products at home and abroad. ND series European electric Hoist of Specific details 1.Loading capacity:0.5~80ton or customized design; 2.Lifting height:3~48m or customzied design; 3.Lifting speed:double lifting speed or frequency conversion, fast and accurate positioning or customized design; 4.Power supply:220~440V,50/60HZ,three phase or customized design. ND series European electric Hoist of Application 1.Factory,workshop,warehouse,store; 2.Logistic,dock,port , freight yard ; 3.Construction building,mine,etc. ND series European electric Hoist of Advantage and feature 1.Walking frequency conversion control, small impact ; 2.Compact limiting size, compact structure, small blind spot; 3.Low headroom designed, save factory space; 4.Patent protection, easy operation, accurate lifting steady operation.
Trolley with two hooks for double girder crane
Trolley with two hooks for double girder crane Trolley with two hooks for double girder crane is also a new product which is developed with advanced design technology referring to…
Wire rope electric metallurgy hoist
Product information of wire rope electric metallurgy hoist Wire rope electric metallurgy hoist which can be mounted on single beam,bridge,gantry and jib cranes,with slight modification,it can also be used as a winch. It is widely used in factories,mines,harbours,warehouses,cargo storage areas and shops,essential in raising working efficiency and improving working conditions. Electric hoist has only one normal speed,which can satisfy normal application,Model MD electric hoist provides two speeds;normal speed and low speed. At a low speed,it can do precise loading and unloading,mounding of sand box,maintenance of machine tools,etc. Thus model MD electric hoist is more widely used than Model MD To meet the needs of lifting heavier cargo,our factory also manufacturers WH20,WH32t electric hoist. Technical parameters of wire rope electric metallurgy hoist: Item specification capacity t 0.25-32 or as required Lifting height m 3-30 or as required Lifting speed m/min 0.35/3.5,0.7/7,7,0.8/8 or as required Traveling speed m/min 20/30 or as required Wire rope type 6×37+1 dia. 3.6/4.7/7.7/11/13/15.5/17.5/22.5/22.5…